Table of Contents
Advertisement
Monitoring Statistics
TX Overruns
TX Carrier
5 Click the Clear LAN Stats button to reset each of the data collection counters to zero in order to begin
new data collections. The RX/TX Packets and RX/TX Bytes totals remain at their present values and
are not cleared.
6 Click the Logout button to securely exit the Access Point applet. There will be a prompt confirming
logout before the applet is closed.
Viewing a LAN's STP Statistics
Each Access Point LAN has the ability to track its own unique STP statistics. Refer to the LAN STP Stats
page when assessing mesh networking functionality for each of the two Access Point LANs. Access
points in bridge mode exchange configuration messages at regular intervals (typically 1 to 4 seconds). If
a bridge fails, neighboring bridges detect a lack of configuration messaging and initiate a spanning-tree
recalculation (when spanning tree is enabled).
To view access point LAN's STP statistics:
1 Select Status and Statistics > LAN Stats > LAN1 Stats (or LAN2 Stats) > STP Stats from the access
point menu tree.
268
TX overruns are buffer overruns on the LAN port. TX
overruns occur when packets are sent faster than the LAN
connection can handle. If TX overruns are excessive,
consider reducing the data rate,
The TX Carrier field displays the number of TCP/IP data
carrier errors.
Altitude 4700 Series Access Point Product Reference Guide
Advertisement
Table of Contents
