Extreme Networks Altitude 4700 Series Product Reference Manual page 147

To configure WLANs on the access point:
1 Select Network Configuration > Wireless from the access point menu tree.
If a WLAN is defined, that WLAN displays within the Wireless Configuration screen. When the
access point is first booted, WLAN1 exists as a default WLAN available immediately for connection.
2 Refer to the information within the Wireless Configuration screen to view the name, ESSID, access
point radio designation, VLAN ID and security policy of existing WLANs.
WLAN Name
ESSID
Radio
VLAN
Altitude 4700 Series Access Point Product Reference Guide
The Name field displays the name of each WLAN that has
been defined. The WLAN names can be modified within
individual WLAN configuration screens. See
Editing Individual WLANs" on page 148
name of a WLAN.
Displays the Extended Services Set Identification (ESSID)
associated with each WLAN. The ESSID can be modified
within individual WLAN configuration screens. See
"Creating/Editing Individual WLANs" on page 148
change the ESSID of a specific WLAN.
The Radio field displays the name of the access point
radio the WLAN is mapped to (either the 802.11a/n radio
or the 802.11b/g/n radio). To change the radio designation
for a specific WLAN, see "Creating/Editing Individual
WLANs" on page 148.
The VLAN field displays the specific VLAN the target
WLAN is mapped to. For information on VLAN
configuration for the WLAN, see
Support" on page 126.
"Creating/
to change the
to
"Configuring VLAN
147