Extreme Networks Altitude 4700 Series Product Reference Manual page 256

Configuring Access Point Security
To configure the proxy RADIUS server for the access point:
1 Select System Configuration > User Authentication > Radius Server > Proxy from the menu tree.
2 Refer to the Proxy Configuration field to define the proxy server's retry count and timeout values.
Retry Count
Timeout
3 Use the Add button to add a new proxy server. Define the following information for each entry
Suffix
Radius Server IP
Port
Shared Secret
4 To remove a row, select the row and click the Del (Delete) button.
5 Click Apply to save any changes to the Proxy screen. Navigating away from the screen without
clicking Apply results in all changes to the screen being lost.
256
Enter a value between 3 and 6 to indicate the number of
times the Access Point attempts to reach a proxy server
before giving up.
Enter a value between 5 and 10 to indicate the number of
elapsed seconds causing the Access Point to time out on
a request to a proxy server.
Enter the domain suffix (such as myisp.com or
mycompany.com) of the users sent to the specified proxy
server.
Specify the IP address of the RADIUS server acting as a
proxy server.
Enter the TCP/IP port number for the RADIUS server
acting as a proxy server. The default port is 1812.
Set a shared secret used for each suffix used for
authentication with the RADIUS proxy server.
Altitude 4700 Series Access Point Product Reference Guide
: