Extreme Networks Altitude 4700 Series Product Reference Manual page 596

Configuring Mesh Networking
3 Create a mesh supported WLAN with the Enable Client Bridge Backhaul option selected.
NOTE
This WLAN should not be mapped to any radio. Therefore, leave both of the "Available On" radio
options unselected.
4 Select the Client Bridge checkbox to enable client bridge functionality on the 802.11a/n radio. Use the
Mesh Network Name drop-down menu to select the name of the WLAN created in step 3.
NOTE
You don't need to configure channel settings on the client bridge (AP#3). It automatically finds the base
bridges (AP#1 and AP#2) and uses the channel assigned to them.
5 If needed, create another WLAN mapped to the 802.11b/g/n radio if 802.11b/g/n support is
required for MUs on that 802.11 band.
596
Altitude 4700 Series Access Point Product Reference Guide