Ap4700>Admin(System.config)>Set - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(system.config)>set
Sets the import/export parameters.
Syntax
set file <filename>
path <path>
server <ipaddress>
user <username>
passwd <pswd>
Example
admin(system.config)>set server 192.168.22.12
admin(system.config)>set user myadmin
admin(system.config>set passwd georges
admin(system.config)>show
cfg filename
cfg filepath
ftp/tftp server ip address
ftp user name
ftp password
For configuration file creation and export, only the set radio-config is supported. Therefore, when
configuration files for export are created, a line such as set rf-function X wips / wlan (where
X is 1 or 2) is never be generated.
For configuration file import, the legacy command set rf-function X wips / wlan is processed
as it has historically.
There is no CLI menu allowing the user to enter set rf-function X wips/wlan (where X is 1 or
2).
Instead, the command set radio-configX (where X is 1,2,3,4,5,6,7, or 8) is created in the
configuration files for export.
For information on importing/exporting access point configurations using the applet (GUI), see
"Importing/Exporting Configurations" on page
554
Sets the configuration file name (1 to 39 characters in length).
Defines the path used for the configuration file upload.
Sets the FTP/TFTP server IP address.
Sets the FTP user name (1 to 39 characters in length).
Sets the FTP password (1 to 39 characters in length).
: cfg.txt
:
: 192.168.22.12
: myadmin
: *******
114.
Altitude 4700 Series Access Point Product Reference Guide