Extreme Networks Altitude 4700 Series Product Reference Manual page 254

Configuring Access Point Security
2 Enter the appropriate information within the LDAP Configuration field to allow the Access Point to
interoperate with the LDAP server. Consult with your LDAP server administrator for details on how
to define the values in this screen.
LDAP Server IP
Port
Login Attribute
Password Attribute
Bind Distinguished
Name
Password
Base Distinguished
Name
Group Attribute
Group Filter
254
Enter the IP address of the external LDAP server acting as
the data source for the RADIUS server. The LDAP server
must be accessible from the WAN port or from the Access
Point's active subnet.
Enter the TCP/IP port number for the LDAP server acting
as a data source for the RADIUS. The default port is 389.
Specify the login attribute used by the LDAP server for
authentication. In most cases, the default value should
work. Windows Active Directory users must use
"sAMAccountName" as their login attribute to successfully
login to the LDAP server.
Enter the password used by the LDAP server for
authentication.
Specify the distinguished name used to bind with the
LDAP server.
Enter a valid password for the LDAP server.
Enter a name that establishes the base object for the
search. The base object is the point in the LDAP tree at
which to start searching.
Define the group attribute used by the LDAP server.
Specify the group filters used by the LDAP server.
Altitude 4700 Series Access Point Product Reference Guide