Ap4700>Admin(System.fw-Update)>Set - Extreme Networks Altitude 4700 Series Product Reference Manual

AP4700>admin(system.fw-update)>set
Defines access point firmware update settings and user permissions.
Syntax
set fw-auto <mode>
cfg-auto <mode>
file <name>
path <path>
server <ip>
user <name>
passwd <password>
admin(system.fw-update)>set fw-auto enable
admin(system.fw-update)>set cfg-auto enable
admin(system.fw-update)>set file 3.0.0.0-29D
admin(system.fw-update)>set path c:/fw
admin(system.fw-update)>set server 157.235.111.22
admin(system.fw-update)>set user mudskipper
admin(system.fw-update)>set passwd muddy
For information on updating access point device firmware using the applet (GUI), see
Firmware" on page 118.
Altitude 4700 Series Access Point Product Reference Guide
When enabled, updates device firmware each time the firmware versions
are found to be different between the access point and the specified
firmware on the remote system.
When enabled, updates device configuration file each time the confif file
versions are found to be different between the access point and the
specified LAN or WAN interface.
Defines the firmware file name (1 to 39 characters).
Specifies a path for the file (1 to 39 characters).
The IP address for the FTP/TFTP server used for the firmware and/or
config file update.
Specifies a username for FTP server login (1 to 39 characters).
Specifies a password for FTP server login (1 to 39 characters). Default is
extreme.
"Updating Device
559