CLI Reference
AP4700>admin(system.access)>set
Defines the permissions to access the access point applet, CLI, SNMP as well as defining their timeout
values.
Syntax
set
applet
app-timeout
sslv2
cli
ssh
auth-timout
inactive-timeout
snmp
admin-auth
server
port
secret
mode
msg
For information on configuring access point access settings using the applet (GUI), see
Data Access" on page
87.
476
Defines the applet HTTP/HTTPS access parameters.
<minutes>
Sets the applet timeout. Default is 300 Mins.
<mode>
Enables/disables SSL v2 support.
Defines CLI Telnet access parameters. Enables/disables access from
lan and wan.
Sets the CLI SSH access parameters.
<seconds>
Disables the radio interface if no data activity is detected after the
interval defined. Default is 120 seconds.
<minutes>
Inactivity interval resulting in the AP terminating its connection.
Default is 120 minutes.
Sets SNMP access parameters for the AP's LAN and WAN ports.
Designates a RADIUS server is used in the authentication verification.
<ip>
Specifies the IP address the Remote Dial-In User Service (RADIUS)
server.
<port#>
Specifies the port on which the RADIUS server is listening. Default is
1812.
<pw>
Defines the shared secret password for RADIUS server authentication
(up to 31 characters).
<mode>
Enables/disables the access point message mode.
Defines the access point login message text (up to 511 characters).
Altitude 4700 Series Access Point Product Reference Guide
"Configuring