Network Lan Commands; Ap4700>Admin(Network.lan) - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference

Network LAN Commands

AP4700>admin(network.lan)>
Displays the LAN submenu. The items available under this command are shown below.
show Shows current access point LAN parameters.
set Sets LAN parameters.
bridge Goes to the mesh configuration submenu.
wlan-mapping Goes to the WLAN/Lan/Vlan Mapping submenu.
dhcp Goes to the LAN DHCP submenu.
type-filter Goes to the Ethernet Type Filter submenu.
ipfpolicy Goes to the LAN IP Filter Policy submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
For an overview of the LAN configuration options using the applet (GUI), see
Interface" on page 123.
302
Altitude 4700 Series Access Point Product Reference Guide
"Configuring the LAN