Firmware Update Commands; Ap4700>Admin(System)>Fw-Update - Extreme Networks Altitude 4700 Series Product Reference Manual

Firmware Update Commands

AP4700>admin(system)>fw-update
Displays the firmware update submenu. The items available under this command are shown below.
NOTE
The access point must complete the reboot process to successfully update the device firmware, regardless
of whether the reboot is conducted uing the GUI or CLI interfaces.
show Displays the current access point firmware update settings.
set Defines the access point firmware update parameters.
update Executes the firmware update.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the current configuration to the access point system flash.
quit Quits the CLI and exits the current session.
Altitude 4700 Series Access Point Product Reference Guide
557