Ap4700>Admin(Network.firewall)>Show - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(network.firewall)>show
Displays the access point firewall parameters.
Syntax
show Shows all access point firewall settings.
Example
admin(network.firewall)>show
Firewall Status
NAT Timeout
Configurable Firewall Filters:
ftp bounce attack filter
syn flood attack filter
unaligned ip timestamp filter
source routing attack filter
winnuke attack filter
seq num prediction attack filter
mime flood attack filter
max mime header length
max mime headers
For information on configuring the Firewall options available to the access point using the applet (GUI),
see "Configuring Firewall Settings" on page
444
: disable
: 10 minutes
: enable
: enable
: enable
: enable
: enable
: enable
: enable
: 8192 bytes
: 16 headers
218.
Altitude 4700 Series Access Point Product Reference Guide