Extreme Networks Altitude 4700 Series Product Reference Manual page 219

To configure the access point firewall settings:
1 Select Network Configuration > Firewall from the access point menu tree.
2 Refer to the Global Firewall Disable field to enable or disable the access point firewall.
Disable Firewall
3 Refer to the Timeout Configuration field to define a timeout interval to terminate IP address
translations.
NAT Timeout
Altitude 4700 Series Access Point Product Reference Guide
Select the Disable Firewall checkbox to disable all firewall
functions on the access point. This includes firewall filters,
NAT, VP, content filtering, and subnet access. Disabling
the access point firewall makes the access point
vulnerable to data attacks and is not recommended during
normal operation if using the WAN port.
Network Address Translation (NAT) converts an IP
address in one network to a different IP address or set of
IP addresses in a different network. Set a NAT Timeout
access point
interval (in minutes) the
the IP address translation process if no translation activity
is detected after the specified interval.
uses to terminate
219