Frequently Asked Vpn Questions - Extreme Networks Altitude 4700 Series Product Reference Manual

The figure below shows how the Access Point VPN Status screen should look if the entire configuration
is set up correctly once the VPN tunnel is active. The status field should display "ACTIVE".

Frequently Asked VPN Questions

The following are common questions that arise when configuring a VPN tunnel.
Question 1: Does the Access Point IPSec tunnel support multiple subnets on the other end of a
●
VPN concentrator?
Yes. The Access Point can access multiple subnets on the other end of the VPN Concentrator from
the Access Point's Local LAN Subnet by:
Creating multiple VPN Tunnels. The AP supports a maximum of 25 tunnels.
●
When using the Remote Subnet IP Address with an appropriate subnet mask, the AP can access
●
multiple subnets on the remote end.
For example: If creating a tunnel using 192.168.0.0/16 for the Remote Subnet IP address, the
following subnets could be accessed:
192.168.1.x
192.168.2.x
192.168.3.x, etc
642
Altitude 4700 Series Access Point Product Reference Guide