Extreme Networks Altitude 4700 Series Product Reference Manual page 290

Monitoring Statistics
Additionally, LAN1 and LAN2 IP mode settings will only be sent if the sender's AP mode is DHCP or BOOTP.
The WAN's IP mode will only be sent if the sender's IP mode is DHCP.
6 Click the Start Flash button to flash the LEDs of other access points detected and displayed within
the Known AP Statistics screen.
Use the Start Flash button to determine the location of the devices displayed within the Known AP
Statistics screen. When an access point is highlighted and the Start Flash button is selected, the LEDs
on the selected access point flash. When the Stop Flash button is selected, the LEDs on the selected
access point go back to normal operation.
7 Click the Logout button to securely exit the Access Point applet. A prompt displays confirming the
logout before the applet is closed.
290
Altitude 4700 Series Access Point Product Reference Guide