Extreme Networks Altitude 4700 Series Product Reference Manual page 69

Radio Button
2.4 GHz WLAN &
5.0 GHz WLAN
only -
no Sensor
Sensor only
Spectrum Analysis
mode
(no WLAN)
2.4 GHz WLAN -
no Sensor
5.0 GHz WLAN -
no Sensor
Radios Off
NOTE
If an Access Point transitions from a one-wlan-radio configuration to a two-wlan-radio config, the radio's
previous user set values (like maximum MUs on radio) are not remembered and need to be defined again.
CAUTION
Only a qualified wireless network administrator should set the Access Point radio configuration. Refer to
"Configuring the 802.11a/n or 802.11b/g/n Radio" on page 174
and their implications.
5 Select the Quick Setup screen's Network Configuration tab to define a minimum set of WAN or LAN
configuration values. The WAN tab displays by default.
Altitude 4700 Series Access Point Product Reference Guide
Altitude 4710 Altitude 4750
Radio 1 WLAN, Radio 1 WLAN,
Radio 2 WLAN Radio 2 WLAN,
Radio 3 Disabled
Radio 1 WIPS, Radio 1 WIPS,
Radio 2 WIPS Radio 2 WIPS,
Radio 3 Disabled
Radio1 WLAN, Radio 1 WLAN,
Radio 2 Disabled Radio 2 Disabled,
Radio 3 Disabled
Radio1 Disabled, Radio 1 Disabled,
Radio 2 WLAN Radio 2 WLAN,
Radio 3 Disabled
Radios 1 and 2 Radios 1, 2 and 3
Disabled Disabled
for an understanding of additional radio values
69