Ap4700>Admin(Network.firewall)>Advanced - Extreme Networks Altitude 4700 Series Product Reference Manual

AP4700>admin(network.firewall)>advanced
Displays whether an access point firewall rule is intended for inbound traffic to an interface or
outbound traffic from that interface.
Syntax
show Shows advanced subnet access parameters.
set Sets advanced subnet access parameters.
import Imports rules from subnet access.
inbound Goes to the Inbound Firewall Rules submenu.
outbound Goes to the Outbound Firewall Rules submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to flash memory.
quit Quits and exits the CLI session.
Example
admin(network.firewall.adv-lan-access)>inbound
admin(network.firewall.adv-lan-access.inb)>list
-----------------------------------------------------------------------------
Idx SCR IP-Netmask
-----------------------------------------------------------------------------
1 1.2.3.4
255.0.0.0
2 33.3.0.0
255.255.255.0
For information on configuring the Firewall options available to the access point using the applet (GUI),
see "Configuring Firewall Settings" on page
Altitude 4700 Series Access Point Product Reference Guide
Dst IP-Netmask TP
2.2.2.2 all 1:
255.0.0.0
10.10.1.1 tcp 1:
255.255.255.0
218.
SPorts DPorts Rev
1: 0.0.0.0
65535 65535 nat port 33
1: 11.11.1.0 allow
65535 65535 nat port 0
NAT Action
deny
447