Extreme Networks Altitude 4700 Series Product Reference Manual page 161

CAUTION
When using the Access Point's hotspot functionality, ensure MUs are re-authenticated when changes are
made to the characteristics of a hotspot enabled WLAN, as MUs within the WLAN will be dropped from Access
Point device association.
To configure hotspot functionality for an Access Point WLAN:
1 Ensure the Enable Hotspot checkbox is selected from within the target WLAN screen, and ensure the
WLAN is properly configured.
Any of the sixteen WLANs on the Access Point can be configured as a hotspot. For hotspot enabled
WLANs, DHCP, DNS, HTTP and HTTPS traffic is allowed (before you login to the hotspot), while
TCP/IP packets are redirected to the port on the subnet to which the WLAN is mapped. For WLANs
not hotspot-enabled, all packets are allowed.
2 Click the Configure Hotspot button within the WLAN screen to display the Hotspot Configuration
screen for that target WLAN.
3 Refer to the HTTP Redirection field to specify how the Login, Welcome, and Fail pages are
maintained for this specific WLAN. The pages can be hosted locally or remotely
Use Default Files
Altitude 4700 Series Access Point Product Reference Guide
Select the Use Default Files checkbox if the login,
welcome and fail pages reside on the Access Point.
.
161