Ap4700>Admin(Network.wireless.wlan)>Show - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(network.wireless.wlan)>show
Displays the access point's current WLAN configuration.
Syntax
show summary
wlan <number>
Example
admin(network.wireless.wlan)>show summary
WLAN1
WLAN Name
ESSID
Radio Band(s)
VLAN
Security Policy
QoS Policy
Rate Limiting
admin(network.wireless.wlan)>show wlan 1
ESS Identifier
WLAN Name
802.11n (5.0 GHz) Radio
802.11n (2.4 GHz) Radio
Client Bridge Mesh Backhaul
Hotspot
Maximum MUs
MU Idle Timeout
Security Policy
MU Access Control
Kerberos User Name
Kerberos Password
disallow mu to mu
Use Secure Beacon
answer Broadcast ess
QoS Policy
per-mu rate limiting
per-mu rate limit (wired-to-wl)
per-mu rate limit (wl-to-wired)
For information on displaying WLAN infromation using the applet (GUI), see
(WLANs)" on page 146.
358
Displays the current configuration for existing WLANs.
Displays the configuration for the requested WLAN (WLAN 1 through 16).
: Lobby
: 101
: 2.4 and 5.0 GHz
: <none>
: Default
: Default
: disabled
: 101
: Lobby
: available
: not available
: available
: not available
: 127
: 30
: Default
: Default
:
: ********
: disable
: disable
: enable
: Default
: disabled
: 1000 kb
: 1000 kb
Altitude 4700 Series Access Point Product Reference Guide
"Enabling Wireless LANs