Ap4700>Admin(Network.wireless.qos.edit) - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(network.wireless.qos.edit)>
Edits the properties of an existing QoS policy.
Syntax
show
set qos-name <index>
vop <index>
mcast <mac>
wmm-qos <index>
param-set <set-name>
cwmin <access
category>
cwmax <access
category>
aifsn <access
category>
txops <access
category>
default
change
..
For information on configuring the WLAN QoS options available to the access point using the applet
(GUI), see "Setting the WLAN Quality of Service (QoS) Policy" on page
422
Displays QoS policy parameters.
Sets the QoS name for the specified index entry.
Enables or disables support (by index) for legacy VOIP
devices.
Defines primary and secondary Multicast MAC address.
Enables or disables the QoS policy index specified.
Defines the data type used with the qos policy and mesh
network. When set to a value other then manual, editing the
access category values is not necessary. Options include; 11g-
default, 11b-default, 11g-wifi, 11b-wifi, 11g-voice, 11b-voice or
manual for advanced users).
<index> Defines the Minimum Contention Window (CW-Min) for
specified access categoiry and index.
<index> Defines the Maximum Contention Window (CW-Max) for
specified access categoiry and index.
<index> Sets the Arbitrary Inter-Frame Space Number (AIFSN) for
specified access categoiry and index.
<index> Configures Opportunity to Transmit Time (TXOPs Time) for
specified access categoiry and index.
<index> Defines CWMIN, CWMAX, AIFSN and TXOPs default values.
Completes the policy edit and exits the session.
Cancels the changes and exits.
Altitude 4700 Series Access Point Product Reference Guide
156.