Extreme Networks Altitude 4700 Series Product Reference Manual page 134

Network Management
To configure type filtering on the access point:
1 Select Network Configuration > LAN > LAN1 (or LAN2) > Type Filter from the access point menu tree.
The Ethernet Type Filter Configuration screen displays for the LAN. No Ethernet types are displayed
(by default) when the screen is first launched.
2 Use the all ethernet types, except drop-down menu to designate whether the Ethernet Types defined
for the LAN are allowed or denied for use by the access point.
3 To add an Ethernet type, click the Add button.
The Add Ethernet Type screen displays. Use this screen to add one type filter option at a time, for a
list of up to 16 entries.
Packet types supported for the type filtering function include 16-bit DIX Ethernet types as well as
Extreme Networks proprietary types. Select an Ethernet type from the drop down menu, or enter the
Ethernet type's hexadecimal value. See your System Administrator if unsure of the implication of
adding or omitting a type from the list for either LAN1 or LAN2.
4 To optionally delete a type filtering selection from the list, highlight the packet type and click the
Delete button.
134
Altitude 4700 Series Access Point Product Reference Guide