Ap4700>Admin(Network.wan.vpn)>Set - Extreme Networks Altitude 4700 Series Product Reference Manual

AP4700>admin(network.wan.vpn)>set
Sets VPN entry parameters.
Syntax
set type <name>
authalgo <name>
authkey <name>
esp-type <name>
esp-encalgo <name>
esp-enckey <name>
esp-authalgo <name>
esp-authkey <name>
spi <name>
usepfs <name>
salife <name>
Altitude 4700 Series Access Point Product Reference Guide
<tunnel type>
<authalgo>
<dir>
<authkey>
<esptype>
<escalgo>
<dir>
<enckey>
<authalgo>
<dir>
<authkey>
<algo> <dir> <value>
<mode>
<lifetime>
Sets the tunnel type <name> to Auto or Manual
for the specified tunnel name.
Sets the authentication algorithm for <name> to
(None, MD5, or SHA1).
Sets the AH authentication key (if type is
Manual) for tunnel <name> with the direction set
to IN or OUT, and the manual authentication key
set to <authkey>. (The key size is 32 hex
characters for MD5, and 40 hex characters for
SHA1).
Sets the Encapsulating Security Payload (ESP)
type. Options include None, ESP, or ESP-AUTH.
Sets the ESP encryption algorithm. Options
include DES, 3DES, AES128, AES192, or
AES256).
Sets the Manual Encryption Key in ASCII for
tunnel <name> and direction
key <enc-key>. The size of the key depends on
the encryption algorithm.
- 16 hex characters for DES
- 48 hex characters for 3DES
- 32 hex characters for AES128
- 48 hex characters for AES192
- 64 hex characters for AES256
Sets the ESP authentication algorithm. Options
include MD5 or SHA1.
Sets ESP Authentication key <name> either for
IN or OUT direction to <auth-key>, an ASCII
string of hex characters. If authalgo is set to
MD5, then provide 32 hex characters. If authalgo
is set to SHA1, provide 40 hex characters.
Sets 6 character IN(bound) or OUT(bound) for
AUTH (Manual Authentication) or ESP for
<name> to <spi> (a hex value more than 0xFF)
<value>.
Enables or disables Perfect Forward Secrecy for
<name>.
Defines the name of the tunnnel <name> the
Security Association Life Time <300-65535>
applies to in seconds.
IN or OUT to the
339