Configuring Content Filtering Settings - Extreme Networks Altitude 4700 Series Product Reference Manual

Configuring Access Point Security
Tx Bytes
Rx Bytes
3 Click the Reset VPNs button to reset active VPNs. Selecting Reset VPNs forces renegotiation of all the
Security Associations and keys. Users could notice a slight pause in network performance.
4 Reference the IKE Summary field to view the following:
Tunnel Name
IKE State
Destination IP
Remaining Life
5 Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout before
the applet is closed.

Configuring Content Filtering Settings

Content filtering allows system administrators to block specific commands and URL extensions from
going out through the Access Point's WAN port. Therefore, content filtering affords system
administrators selective control on the content proliferating the network and is a powerful data and
network screening tool. Content filtering allows the blocking of up to 10 files or URL extensions and
allows blocking of specific outbound HTTP, SMTP, and FTP requests.
240
The Tx Bytes column lists the amount of data (in bytes)
transmitted through each configured tunnel.
The Rx Bytes column lists the amount of data (in bytes)
received through each configured tunnel.
Displays the name of each of the tunnels configured to use
IKE for automatic key exchange.
Lists the state for each of the tunnels configured to use
IKE for automatic key exchange. When the tunnel is not
active, the IKE State field displays NOT_CONNECTED.
When the tunnel is active, the IKE State field displays
CONNECTED.
Displays the destination IP address for each tunnel
configured to use IKE for automatic key exchange.
Lists the remaining life of the current IKE key for each
tunnel. When the remaining life on the IKE key reaches 0,
IKE initiates a negotiation for a new key. IKE keys
associated with a renegotiated tunnel.
Altitude 4700 Series Access Point Product Reference Guide