Ap4700>Admin(Network.lan.dhcp)>Set - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(network.lan.dhcp)>set
Sets DHCP parameters for the LAN port.
Syntax
set range <LAN-idx>
lease <LAN-idx>
Example
admin(network.lan.dhcp)>set range 1 192.168.0.100 192.168.0.254
admin(network.lan.dhcp)>set lease 1 86400
admin(network.lan.dhcp)>show
**LAN1 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address
Ending IP Address
Lease Time
For information on configuring DHCP using the applet (GUI), see
page 123.
318
<ip1> <ip2> Sets the DHCP assignment range from IP address <ip1> to IP
address <ip2> for the specified LAN (1-lan1, 2-lan2).
<lease> Sets the DHCP lease time <lease> in seconds (1-999999) for
the specified LAN.
: 192.168.0.100
: 192.168.0.254
: 86400
"Configuring the LAN Interface" on
Altitude 4700 Series Access Point Product Reference Guide