Ap4700>Admin(Network.router)>Set - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(network.router)>set
Shows the access point route table.
Syntax
set auth Sets the RIP authentication type (none, simple or MD5).
dir Sets RIP direction (rx, tx or both)
id Sets MD5 authetication ID (1-256) for specific index (1-2).
key Sets MD5 authetication key (up to 16 characters) for specified inded (1-2).
passwd Sets the password (up to 16 characters) for simple authentication.
type Defines the RIP type (off, ripv1, ripv2, or ripv1v2).
dgw-iface Sets the default gateway interface (lan1, lan2, wan or none).
For information on configuring the Router options available to the access point using the applet (GUI),
see "Configuring Router Settings" on page
450
186.
Altitude 4700 Series Access Point Product Reference Guide