Linux - Bootp Server Configuration - Extreme Networks Altitude 4700 Series Product Reference Manual

DHCP Priorities
The following flowchart indicates the priorities used by the Access Point when the DHCP server is
configured for multiple options.
--------------------------------------------------------------------------------------------
If the DHCP Server is configured for options 186 and 66 (to assign TFTP Server IP addresses) the
Access Point uses the IP address configured for option 186. Similarly, if the DHCP Server is configured
for options 187 and 67 (for the firmware file) the Access Point uses the file name configured for option
187. If the DHCP Server is configured for embedded and global options, the embedded options take
precedence.

Linux - BootP Server Configuration

See the following sections for information on these BootP server configurations in the Linux
environment:
BootP Options on page 635
●
BootP Priorities on page 637
●
BootP Options
This section contains instructions for the automatic update of the Access Point firmware and
configuration file using a BootP Server.
Altitude 4700 Series Access Point Product Reference Guide
635