Extreme Networks Altitude 4700 Series Product Reference Manual page 94

System Configuration
The Certificate Request screen disappears and the ID of the generated certificate request displays in
the drop-down list of certificates within the Self Certificates screen.
5 Click the Generate Request button.
The generated certificate request displays in Self Certificates screen text box.
6 Click the Copy to Clipboard button.
The content of certificate request is copied to the clipboard.
Create an email to your CA, paste the content of the request into the body of the message and send
it to the CA.
The CA signs the certificate and will send it back. Once received, copy the content from the email
into the clipboard.
7 Click the Paste from clipboard button.
The content of the email displays in the window.
Click the Load Certificate button to import the certificate and make it available for use as a VPN
authentication option. The certificate ID displays in the Signed list.
NOTE
If the access point is restarted after a certificate request has been generated but before the signed
certificate is imported, the import will not execute properly. Do not restart the access point during this process.
8 To use the certificate for a VPN tunnel, first define a tunnel and select the IKE settings to use either
RSA or DES certificates. For additional information on configuring VPN tunnels, see
VPN Tunnels" on page
94
225.
Altitude 4700 Series Access Point Product Reference Guide
"Configuring