Ap4700>Admin(Network.wan.nat)>Set - Extreme Networks Altitude 4700 Series Product Reference Manual

AP4700>admin(network.wan.nat)>set
Sets NAT inbound and outbound parameters.
Syntax
set type <index>
ip <index>
inb <index>
outb <index>
Example
admin(network.wan.nat)>set type 2 1-to-many
admin(network.wan.nat)>set ip 2 10.1.1.1 (this command is used when NAT is 1-to-1)
admin(network.wan.nat)>show 2
WAN IP Mode
WAN IP Address
NAT Type
Inbound Mappings
unspecified port forwarding mode
unspecified port fwd. ip address
one to many nat mapping
-------------------------------------------------------------------------------
LAN No.
-------------------------------------------------------------------------------
1
2
For an overview of the NAT options available using the applet (GUI), see
Address Translation (NAT) Settings" on page
Altitude 4700 Series Access Point Product Reference Guide
<type> Sets the type of NAT translation for WAN address index <idx> (1-8)
to <type> (none, 1-to-1, or 1-to-many).
<ip> Sets NAT IP mapping associated with WAN address <idx> to the
specified IP address <ip>.
<ip> Sets inbound IP address for specified index <index> <ip address>
<mode> Sets inbound mode for specified index <index> <enable/disable>
<ip> Sets outbound IP address for specified index <index> <ip address>
<from> <to> Sets outbound NAT destination <LAN1 or LAN2> <WAN ip 1-8 or
None>.
: enable
: 157.235.91.2
: 1-to-many
: Port Forwarding
: enable
: 111.223.222.1
WAN IP
157.235.91.2
10.1.1.1
141.
"Configuring Network
333