Moving Rogue Aps To The Allowed Ap List - Extreme Networks Altitude 4700 Series Product Reference Manual

Configuring Access Point Security
4 Click Apply to save any changes to the Rogue AP Detection screen. Navigating away from the screen
without clicking Apply results in all changes to the screens being lost.
5 Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings
displayed on the Rogue AP Detection screen to the last saved configuration.
6 Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout before
the applet is closed.

Moving Rogue APs to the Allowed AP List

The Active APs screen enables the user to view the list of detected rogue APs and, if necessary, select
and move an AP into a list of allowed devices. This is helpful when the settings defined within the
Rogue AP Detection screen inadvertently detect and define a device as a rogue AP.
To move detected rogue APs into a list of allowed APs:
1 Select Network Configuration > Wireless > Rogue AP Detection > Active APs from the access point menu
tree.
The Active APs screen displays with detected rogue devices displayed within the Rogue APs table.
246
Altitude 4700 Series Access Point Product Reference Guide