CLI Reference
AP4700>admin(network.ipfilter)>set
Sets Global IP Filter table entries.
Syntax
set
Sets Global IP Filter table entries.
Example
admin(network.ipfilter)>set
name
protocol
port-start
port-end
saddr-start
saddr-end
daddr-start
daddr-end
admin(network.ipfilter)>
456
: Sets name of IP Filters
: Sets the protocol of the IP filter
: Sets the starting port of the IP Filter
: Sets the end port of the IP Filter
: Sets the source address start of the IP Filter
: Sets the source address end of the IP Filter
: Sets the destination address start of the IP Filter
: Sets the destination address end of the IP Filter
Altitude 4700 Series Access Point Product Reference Guide