Extreme Networks Altitude 4700 Series Product Reference Manual page 201

4 Enable and configure an Authentication option if necessary for the target security policy.
Manually Pre-
Shared Key / No
Authentication
Kerberos
802.1x EAP
5 Enable and configure an Encryption option if necessary for the target security policy.
No Encryption
WEP 64 (40-bit
key)
WEP 128 (104-bit
key)
KeyGuard
WPA/WPA2 TKIP
WPA2/CCMP
(802.11i)
6 Click Apply to keep changes made within the New Security Policy screen (if any).
Configure encryption or authentication supported security policies by referring to the following.
For access point authentication:
To create a security policy supporting Kerberos, see,
●
page 202.
To define a security policy supporting 802.1x EAP, see
●
on page 204.
Altitude 4700 Series Access Point Product Reference Guide
Select this button to disable authentication. This is the
default value for the Authentication field.
Select the Kerberos button to display the Kerberos
Configuration field within the New Security Policy screen.
For specific information on configuring Kerberos, see
"Configuring Kerberos Authentication" on page
Select the 802.1x EAP button to display the 802.1x EAP
Settings field within the New Security Policy screen. For
specific information on configuring EAP, see
802.1x EAP Authentication" on page
If No Encryption is selected, encryption is disabled for the
security policy. If security is not an issue, this setting
avoids the overhead an encryption protocol causes on the
access point. No Encryption is the default value for the
Encryption field.
Select the WEP 64 (40 bit key) button to display the WEP
64 Settings field within the New Security Policy screen. For
specific information on configuring WEP 64, see
"Configuring WEP Encryption" on page
Select the WEP 128 (104 bit key) button to display the
WEP 128 Settings field within the New Security Policy
screen. For specific information on configuring WEP 128,
see "Configuring WEP Encryption" on page
Select the KeyGuard button to display the KeyGuard
Settings field within the New Security Policy screen. For
specific information on configuring KeyGuard, see
"Configuring KeyGuard Encryption" on page
Select the WPA/WPA2 TKIP button to display the WPA/
TKIP Settings field within the New Security Policy screen.
For specific information on configuring WPA/WPA2 TKIP,
see "Configuring WPA/WPA2 Using TKIP" on page
Select the WPA2/CCMP (802.11) button to display the
WPA2/CCMP Settings field within the New Security Policy
screen. For detailed information on configuring WPA2/
CCMP, see "Configuring WPA2-CCMP (802.11i)" on
page 213.
202.
"Configuring
204.
208.
208.
209.
211.
"Configuring Kerberos Authentication" on
"Configuring 802.1x EAP Authentication"
201