Extreme Networks Altitude 4700 Series Product Reference Manual page 84

System Configuration
To define the Access Point's power setting:
1 Select System Configuration > Power Settings from the menu tree.
2 Refer to the following to assess the Access Point's current power state. Once known, determine how
available power resources are applied to the Access Point's radios.
NOTE
Within the Power Configuration field, an installation professional selects a power mode based on the
different power resources available to that Access Point. For 3af and 3at, choose between Default and Option as
best suited to that hardware. For example, if Option is selected for 3af Power, and the Access Point is a dual
radio model, the following configuration is set:
LAN port ON (1000 BAST-T)
WAN port OFF
Radio 1 (2.4) on, 2x3 mode with maximum transmit power 18dBm
Radio 2 (5.0) on, 2x3 mode with maximum transmit power 18dBm
Contact Extreme Networks Support if unsure of your Access Point's optimal power management settings. Go to
https://esupport.extremenetworks.com.
Power Status
84
Refer to the (read only) power status field to review the
power available to the AP. The status for an Altitude 4710
and Altitude 4750 are slightly different. For an Altitude
4710, the options are 3af, Mid Power or Full Power. For an
Altitude 4750 model, the options are 3at, 3af or Full
Power.
Altitude 4700 Series Access Point Product Reference Guide