Ap4700>Admin(Network.lan.bridge)>Set - Extreme Networks Altitude 4700 Series Product Reference Manual

AP4700>admin(network.lan.bridge)>set
Sets the mesh configuration parameters for the access point's LANs.
Syntax
set priority <LAN-idx>
hello <LAN-idx>
msgage <LAN-idx>
fwddelay <LAN-idx>
ageout <LAN-idx>
Example
admin(network.lan.bridge)>set priority 2 63335
admin(network.lan.bridge)>set hello 2 2
admin(network.lan.bridge)>set msgage 2 20
admin(network.lan.bridge)>set fwddelay 2 15
admin(network.lan.bridge)>set ageout 2 300
admin(network.lan.bridge)>show
** LAN1 Mesh Configuration **
Bridge Priority
Hello Time (seconds)
Message Age Time (seconds)
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds)
** LAN2 Mesh Configuration **
Bridge Priority
Hello Time (seconds)
Message Age Time (seconds)
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds)
For an overview of the access point's mesh networking options using the applet (GUI), see
"Configuring Mesh Networking Support" on page
Altitude 4700 Series Access Point Product Reference Guide
<seconds> Sets bridge priority time in seconds (0-65535) for specified LAN.
<seconds> Sets bridge hello time in seconds (0-10) for specified LAN.
<seconds> Sets bridge message age time in seconds (6-40) for specified LAN.
<seconds> Sets bridge forward delay time in seconds (4-30) for specified LAN.
<seconds> Sets bridge forward table entry time in seconds (4-3600) for specified
LAN.
:63335
:2
:20
:300
:63335
:2
:20
:300
581.
307