AP4700>admin(network.wan.nat)>delete
Deletes NAT entries.
Syntax
delete
<idx>
<entry>
<idx>
all
Example
admin(network.wan.nat)>list 1
-----------------------------------------------------------------------------
index
name
Transport
-----------------------------------------------------------------------------
1
special tcp
admin(network.wan.nat)>delete 1 1
admin(network.wan.nat)>list 1
-----------------------------------------------------------------------------
index
name
Transport
-----------------------------------------------------------------------------
Related Commands:
add
Adds entries to the list of inbound NAT entries.
list
Displays the list of inbound NAT entries.
For an overview of the NAT options available using the applet (GUI), see
Address Translation (NAT) Settings" on page
Altitude 4700 Series Access Point Product Reference Guide
Deletes a specified NAT index entry <entry> associated with the WAN.
Deletes all NAT entries associated with the WAN.
start port
end port
20
21
start port
end port
141.
internal ip
translation
192.168.42.16
21
internal ip
translation
"Configuring Network
335