CLI Reference
AP4700>admin(system.snmp.traps)>list
Lists SNMP trap entries.
Syntax
list
v1v2c
v3
<idx>
all
Example
admin(system.snmp.traps)>add v1v2 203.223.24.2 162 mycomm v1
admin(system.snmp.traps)>list v1v2c
----------------------------------------------------------------------
index
dest ip
----------------------------------------------------------------------
1
203.223.24.2
admin(system.snmp.traps)>add v3 201.232.24.33 555 BigBoss none md5
admin(system.snmp.traps)>list v3 all
index
destination ip
destination port
username
security level
auth algorithm
auth password
privacy algorithm
privacy password
For information on configuring SNMP traps using the applet (GUI), see
Thresholds" on page
107.
502
Lists SNMP v1/v2c access entries.
Lists SNMP v3 access entry <idx 1-10> .
Lists all SNMP v3 access entries.
dest port
community
162
mycomm
: 1
: 201.232.24.33
: 555
: BigBoss
: none
: md5
: ********
: des
: ********
version
v1
"Configuring SNMP RF Trap
Altitude 4700 Series Access Point Product Reference Guide