Extreme Networks Altitude 4700 Series Product Reference Manual page 90

System Configuration
Message Settings
9 Click Apply to save any changes to the Access screen. Navigating away from the screen without
clicking the Apply button results in all changes to the screen being lost.
10 Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings
displayed on the Access screen to the last saved configuration.
11 Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout before
the applet is closed.
90
Click the Message Settings button to display a screen
used to create a text message. Once displayed, select the
Enable Login Message checkbox to allow your customized
message to be displayed when the user is logging into the
Access Point. If the checkbox is not selected (as is the
case by default), the user will encounter the login screen
with no additional message.
When the login message function is enabled, the user can
enter a (511 character maximum) message describing any
usage caveat required (such as the authorization
disclaimer displayed on the following page). Thus, the
login message can serve an important function by
discouraging unauthorized users from illegally managing
the Access Point. As your message is entered, the
character usage counter is updated to allow you to
visualize how close you are coming to the maximum
allowed number of characters. Click the Clear button at
any time to remove the contents of the message and begin
a new one. Once you have finished creating your
message, click the OK button to return to the Access
screen.
Altitude 4700 Series Access Point Product Reference Guide