Extreme Networks Altitude 4700 Series Product Reference Manual page 185

To define MU rate limits for specific WLANs on an Access Point radio:
1 Select Network Configuration > Wireless > Rate Limiting from the access point menu tree.
2 Select the Enable Rate Limiting option to globally enable MU rate limiting for each of the Access
Point's 16 WLANs.
Once enabled, MU rate limiting still needs to be enabled for a specific WLAN, then the rate limit
allocation needs to be defined for MU traffic within that specific WLAN. To modify a WLAN-to-
radio assignment, see
3 Refer to the Per WLAN Rate Limits field to review the rate limits defined thus far for any of the
Access Point's 16 WLANs.
The rates are displayed in Kbps for both wired to wireless and wireless to wired traffic flows from
the WLAN and its radio configuration.
4 Click Apply to save any changes to the Rate Limiting screen. Navigating away from the screen
without clicking Apply results in all changes to the screens being lost.
5 Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings
displayed on the Rate Limiting screen to the last saved configuration.
6 Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout before
the applet is closed.
NOTE
Though the Rogue AP and Firewall features appear after the Rate Limiting features within the access point
menu tree, they are described in
Altitude 4700 Series Access Point Product Reference Guide
"Creating/Editing Individual WLANs" on page
"Configuring Access Point Security" on page
148.
197, as both items are data
185