Table of Contents
Advertisement
Network Management
NOTE
If using a dual-radio Access Point, 4 BSSIDs for the 802.11b/g/n radio and 4 BSSIDs for the 802.11a/n
radio are available.
WLAN
BSSID
BC/MC Cipher
Status
Message
10 Use the Primary WLAN drop-down menu to select a WLAN from those WLANs sharing the same
BSSID. The selected WLAN is the primary WLAN for the specified BSSID.
11 Click Apply to save any changes to the Radio Settings and Advanced Settings screens. Navigating
away from the screen without clicking Apply results in changes to the screens being lost.
12 Click Undo Changes (if necessary) to undo any changes made to the screen and its sub-screens. Undo
Changes reverts the settings to the last saved configuration.
13 Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout before
the applet is closed.
Configuring MU Rate Limiting
Use the Rate Limiting screen to control the MU rate limit allotted to individual WLANs. MU rate
limiting enables an administrator to determine how much radio bandwidth is allowed to each MU
within any one of the 16 supported AP WLANs. Rate limiting is on per a MU basis for the WLAN.
184
Lists the WLAN names available to the 802.11a/n or
802.11b/g/n radio that can be assigned to a BSSID.
Assign a BSSID value of 1 through 4 to a WLAN in order
to map the WLAN to a specific BSSID.
A read only field displaying the downgraded BC/MC
(Broadcast/Multicast) cipher for a WLAN based on the
BSSID and VLAN ID to which it has been mapped.
Displays the following color coded status:
Red—Error (Invalid Configuration)
Yellow—Warning (Broadcast Downgrade)
Green—Good (Configuration is OK)
Displays the verbal status of the WLAN and BSSID
assignments. If the Status column displays green, the
Message will typically be Configuration is OK. If yellow, a
description of invalid configuration displays.
Altitude 4700 Series Access Point Product Reference Guide
Advertisement
Table of Contents
