Table of Contents
Advertisement
2
C H A P T E R
Installation Instructions
An Altitude 4521 Series Access Point can attach to a wall, mount under a suspended T-Bar
or mount above a ceiling. Selecting a mounting option based on the physical environment
of the coverage area. Do not mount the Access Point in a location that has not been
approved in a site survey.
To prepare for an installation, perform the following:
1 Verify the contents of the box includes the intended Access Point and accessory
hardware.
2 Review site survey and network analysis reports to determine the location and mounting
position for the Access Point.
3 Connect a CAT-5e or better Ethernet cable to a PoE compatible device and run the cable
to the installation site. Ensure there is sufficient cable slack to perform the installation
steps.
Altitude™ 4521 Series Access Point Installation Guide
Hardware Installation
9
Advertisement
Table of Contents
