Configure Snmpv3 Add User Clone-From - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

configure snmpv3 add user clone-from

configure snmpv3 add user {hex <hex value>} <user name> clone-from {hex
<hex value>} <user name>
Description
Create a new user by cloning from an existing SNMPv3 user.
Syntax Description
hex
user name
Default
N/A.
Usage Guidelines
Use this command to create a new user by cloning an existing one. Once you have successfully cloned
the new user, you can modify its parameters using the following command:
configure snmpv3 add user {hex <hex value>}
sha] [hex <hex octet> | <password>]} {privacy [hex <hex octet> | <password>]}
{volatile}
Users cloned from the default users will have the storage type of non-volatile. The default names are:
admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv.
Example
Use the following command to create a user cloneMD5 with same properties as the default user
initalmd5. All authorization and privacy keys will initially be the same as with the default user
initialmd5.
configure snmpv3 add user cloneMD5 clone-from initialmd5
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
164
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the user name to add or to clone from.
<user name> {authentication [md5 |
ExtremeWare 7.7 Command Reference Guide