Disable Sharing - Extreme Networks ExtremeWare Command Reference Manual

disable sharing

disable sharing [<port>]
Description
Disables a load-sharing group of ports.
Syntax Description
port Specifies the master port of a load-sharing group. On a modular switch, is a combination of the slot and
port number, in the format <slot>:<port>.
Default
Disabled
Usage Guidelines
This command increases bandwidth tracking and resiliency.
On a modular switch,
is the port configured as the load-sharing master port. For a detailed explanation of port specification,
see "Modular Switch Numerical Ranges" or "Stand-alone Switch Numerical Ranges" in Chapter 1.
When sharing is disabled, the master port retains all configuration including VLAN membership.
Configuration for all other member ports is reset to default values. Member ports are removed from all
VLANs to prevent loops.
Example
The following command disables sharing on master logical port 9, which contains ports 9-12 on a
stand-alone switch:
disable sharing 9
The following command disables sharing on master logical port 9 in slot 3, which contains ports 9
through 12 on a modular switch:
disable sharing 3:9
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 4.0 to support modular switches.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
is specified as <
<port> slot>:<port number>
disable sharing
. On a stand-alone switch,
<port>
303