Command History - Extreme Networks ExtremeWare Command Reference Manual

Command Reference Overview

Command History

ExtremeWare "remembers" the last 49 commands you entered. You can display a list of these
commands by using the following command:
history
What is New in ExtremeWare 7.7
This section contains the new and modified commands in ExtremeWare 7.7:
• New commands in ExtremeWare 7.7
• Commands modified in ExtremeWare 7.7
New Commands in ExtremeWare 7.7
The following are the new commands added to ExtremeWare 7.7:
• disable ip-security arp gratuitous-protection vlan [<vlan name> | all]
• disable ip-security arp gratuitous-protection vlan [<vlan name> | all]
• configure reboot-loop-protection backup-msm threshold <time-interval> <count>
• configure reboot-loop-protection backup-msm threshold <use-master-config>
• configure stacking slot-binding <slot number> [loose|strict]
• configure stpd <spanning tree name> ports link-type edge <port number> bpdu-filter enable
• configure stpd <spanning tree name> ports link-type edge <port number> bpdu-filter disable
• enable stpd bpdu-filter
• configure mvr [add|delete] vlan <vlan-name>
• disable mvr
• enable mvr
• show mvr
• unconfigure pim {vlan <vlan name>}
• configure pim timer bsm-wait-time <seconds>
• configure netlogin agingtime <seconds>
• configure netlogin dot1x timers supplicant-response-timeout
• unconfigure netlogin agingtime
Commands Modified in ExtremeWare 7.7
The command...
disable arp-learning
disable arp-learning ports <portlist>
70
has been modified to...
disable ip-security arp learning learn-from-arp
disable ip-security arp learning learn-from-arp ports
<portlist>
ExtremeWare 7.7 Command Reference Guide