configure port aggregate-bandwidth percent
configure port <portnumber> aggregate-bandwidth percent <bandwidth>
Description
Controls the egress bandwidth of a particular port by restricting it to the specified percentage.
NOTE
This command is available only on the "i" series switches.
Syntax Description
portnumber
bandwidth
Default
The default percentage of egress bandwidth of a port is 100%.
Usage Guidelines
Port aggregate bandwidth control lets you control aggregate bandwidth of all queues of a specific port.
This feature is useful if you use several queues for classifying traffic (e.g., importance, delay sensitivity,
burst) and you want to restrict total bandwidth for all queues to a certain amount, while preserving the
previously classified queues' configuration.
Example
The following command restricts the egress bandwidth of port 3 on slot 1 to 20%.
configure port 1:3 aggregate-bandwidth percent 20
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is only available on the "i" series platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies a port or slot and port.
Specifies a percentage number (1-99) of restricted aggregate bandwidth.
configure port aggregate-bandwidth percent
269