Configure Snmpv3 Add Group User - Extreme Networks ExtremeWare Command Reference Manual

configure snmpv3 add group user

configure snmpv3 add group [hex <hex value> | <group name>] user [ hex <hex
value} | <user name>] {sec-model [snmpv1| snmpv2 | usm]} {volatile}
Description
Add a user name (security name) to a group.
Syntax Description
hex
group name
user name
sec-model
snmpv1
snmpv2
usm
volatile
Default
The default values are:
• sec-model—USM
• non-volatile storage
Usage Guidelines
Use this command to associate a user name with a group.
As per the SNMPv3 RFC, a security name is model independent while a username is model dependent.
For simplicity, both are assumed to be same here. User names and security names are handled the same.
In other words, if a user is created with the user name username, the security name value is the same,
username.
Every group is uniquely identified by a security name and security model. So the same security name
can be associated to a group name but with different security models.
Example
Use the following command to associate the user userV1 to the group defaultRoGroup with SNMPv1
security:
configure snmpv3 add group defaultRoGroup user userV1 sec-model snmpv1
Use the following command to associate the user userv3 with security model
to the access group defaultRoGroup:
volatile
configure snmpv3 add group defaultRoGroup user userV3 volatile
ExtremeWare 7.7 Command Reference Guide
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the group name to add or modify.
Specifies the user name to add or modify.
Specifies the security model to use.
Specifies the SNMPv1 security model.
Specifies the SNMPv2c security model.
Specifies the SNMPv3 User-based Security Model (USM).
Specifies volatile storage.
configure snmpv3 add group user
and storage type
USM
153