Configure Time - Extreme Networks ExtremeWare Command Reference Manual

configure time

configure time <date> <time>
Description
Configures the system date and time.
Syntax Description
date Specifies the date in mm/dd/yyyy format.
time Specifies the time in hh:mm:ss format.
Default
N/A
Usage Guidelines
The format for the system date and time is as follows:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format. The AM hours range from 1 through 11, and the PM hours range
from 12 through 23.
For ExtremeWare 7.1e and higher on the "e" series of switches:
• You cannot set the year past 2036.
For ExtremeWare 6.0 and higher on the "i" series of switches:
• You cannot set the year past 2035.
For ExtremeWare 2.0 and 4.x:
• You cannot set the year past 2023.
Example
The following command configures a system date of February 15, 2005 and a system time of 8:42 AM
and 55 seconds:
configure time 02/15/2005 08:42:55
History
This command was first available in ExtremeWare 2.0.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
configure time
95