Configure Banner Netlogin - Extreme Networks ExtremeWare Command Reference Manual

Commands for Accessing the Switch

configure banner netlogin

configure banner netlogin
Description
Configures the network login banner that is displayed at the beginning of each login prompt of each
session.
Syntax Description
This command has no arguments or variables.
Default
N/A
Usage Guidelines
The network login banner and the switch banner cannot be used at the same time. If you configure a
Network Login banner, users do not see the normal banner. If no banner is configured, the Extreme logo
is displayed. The network login banner displays in HTML. No links or images are supported.
Press [Enter] to enter text on a new line. Press [Enter] twice to finish entering the network login banner.
You can enter up to 1024 characters in the banner.
Example
The following command adds the banner "Welcome to your switch" in 8 point purple Arial before the
login prompt:
configure banner netlogin [Enter]
<font face="Arial" size=8 color=534579>Welcome to your switch</font>
[Enter]
[Enter]
History
This command was introduced in ExtremeWare 6.2.2.
This command was added to the "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
86 ExtremeWare 7.7 Command Reference Guide