Configure Snmp Access-Profile Readonly - Extreme Networks ExtremeWare Command Reference Manual

configure snmp access-profile readonly

configure snmp access-profile readonly [<access-profile> | none]
Description
Assigns an access profile that limits which stations have read-only access to the switch.
Syntax Description
access-profile
none
Default
All users have access until an access profile is created and specified.
Usage Guidelines
The ability to read SNMP information can be restricted through the use of an access profile. An access
profile permits or denies a named list of IP addresses and subnet masks.
You must create and configure an access profile before you can use this command. You create an access
profile using the
configure access-profile
Use the
none
Read community strings provide read-only access to the switch. The default read-only community
string is public. The community string for all authorized trap receivers must be configured on the
switch for the trap receiver to receive switch-generated traps. SNMP community strings can contain up
to 32 characters.
To view the SNMP read-only access communities configured on the switch, use the
command. The
encrypted names and the number of read-only communities configured on the switch.
To restore defaults to all SNMP-related entries, including the SNMP parameters modified using the
configure snmp access-profile readonly
Example
The following command allows the user defined access profile admin read-only access to the switch:
configure snmp access-profile readonly admin
History
This command was first available in ExtremeWare 6.0.
This command was added to the Summit "e" series of switches in 7.2e.
ExtremeWare 7.7 Command Reference Guide
Specifies a user defined access profile.
Cancels a previously configured access profile.
create access-profile type
command.
option to remove a previously configured access profile.
command displays information about the switch including the
show management
command. You configure an access profile using the
command, use the
unconfigure management
configure snmp access-profile readonly
show management
command.
127