Configure Dns-Client Add Name-Server - Extreme Networks ExtremeWare Command Reference Manual
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
configure dns-client add name-server
configure dns-client add name-server
configure dns-client add name-server <ipaddress>
Description
Adds a DNS name server to the available server list for the DNS client.
Syntax Description
ipaddress
Specifies an IP address.
Default
N/A
Usage Guidelines
Up to three DNS name servers can be configured in ExtremeWare versions prior to 6.2.1. In
ExtremeWare 6.2.1 and later, eight DNS name servers can be configured.
Example
The following command specifies that the switch use the DNS server 10.1.2.1:
configure dns-client add name-server 10.1.2.1
History
This command was first available in ExtremeWare 6.2.2.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
89
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?