Disable Snmp Traps Exceed-Committed-Rate Ports - Extreme Networks ExtremeWare Command Reference Manual

disable snmp traps exceed-committed-rate ports

disable snmp traps exceed-committed-rate ports <portlist> {<Ingress QOS
Profile>}
Description
Prevents SNMP traps from being sent from the indicated ports on the switch.
Syntax Description
portlist
Ingress QOS Profile
Default
Disabled.
Usage Guidelines
To see which ports have such traps enabled, use the
Example
The following command will prevent SNMP exceed-committed-rate traps from being sent for all ingress
QOS profiles on ports 2:5 through 2:8.
disable snmp traps exceed-committed-rate ports 2:5-2:8
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on
ExtremeWare 7.7 Command Reference Guide
"3"
Specifies a list of series I/O module ports (in the form 2:*, 2:5, or 2:6-2:8).
Specifies an optional ingress QOS profile. If not specified, all ingress QOS
profiles for the indicated ports will be affected.
show config
"3" series I/O modules only.
disable snmp traps exceed-committed-rate ports
command.
191