Configure Banner - Extreme Networks ExtremeWare Command Reference Manual

configure banner

configure banner
Description
Configures the banner string that is displayed at the beginning of each login prompt of each session.
Syntax Description
This command has no arguments or variables.
Default
N/A
Usage Guidelines
Press [Return] at the beginning of a line to terminate the command and apply the banner. To clear the
banner, press [Return] at the beginning of the first line.
For ExtremeWare 6.0 and higher including the "e" series releases:
• You can enter up to 24 rows of 79-column text that is displayed before the login prompt of each
session.
For ExtremeWare 2.0 and ExtremeWare 4.x:
• You can enter up to 24 rows of 80-column text that is displayed before the login prompt of each
session.
Example
The following command adds a banner, Welcome to the switch, before the login prompt:
configure banner [Return]
Welcome to the switch
History
This command was first available in ExtremeWare 2.0.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
configure banner
85