Configure Lldp Ports Vendor-Specific Dot1 Vlan-Name - Extreme Networks ExtremeWare Command Reference Manual

LLDP Commands

configure lldp ports vendor-specific dot1 vlan-name

configure lldp ports [all | <portlist>] [advertise | no-advertise]
vendor-specific dot1 vlan-name
Description
Configures LLDP ports to advertise or not advertise VLAN name information to its neighbors. This
allows an IEEE 802.1Q-compatible 802 LAN station to advertise the assigned name of any VLAN with
which it is configured. Since this is a vendor specific option, there may not be support for this from the
neighbor.
Syntax Description
all
portlist
advertise
no-advertise
Default
The default is not to advertise.
Usage Guidelines
N/A.
Example
The following command configures all ports to not advertise VLAN name information to
neighbors.
configure lldp ports all no-advertise vendor-specific dot1 vlan-name
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on all Extreme switches.
2420
Applies to all ports on the switch.
Specifies a list of switch ports in the form i:*, i:n, or i:n-i-m.
Specifies that information is to be sent to neighbors.
Specifies that information is not to be sent to neighbors.
ExtremeWare 7.7 Command Reference Guide